If you own an armory of construction machinery, you’d know that their maintenance is key. Conveyor belts are no exception to this norm. Used in concrete plants, these belts are integral to the smooth and uninterrupted functioning of the asphalt mixing plants they are a part of. That’s why maintenance is of paramount importance.
To begin with, conveyor belts need to be maintained from time to time, not by themselves, but together with their frame. The person doing the maintenance needs to be cognizant of the construction of the belt. Basic maintenance requires in-depth familiarity with the equipment and its framework.
So, in a nutshell, maintenance is a big part of using conveyor belts. It works best when you have a checklist of maintenance work for it. Get them done from time to time to keep your conveyor belts in perfect shape.
The Maintenance Drill for conveyor belts:
Maintenance drill for conveyor belts involves a thorough examination of the belt from both sides.
- It
starts by understanding and appreciating the physical condition of the equipment.
- The
conveyor belt needs to be run to see how it’s doing prior to the maintenance. If any unusual behavior is noticed in the components, that should be attended to during the maintenance work.
- If
the repair person sees any anomaly in the function, they should take note.
- Anything
that sticks out or is stuck in should also be removed.
- The repairman should also look for misalignment in the machine. All abnormal belt tracking should be repaired.
- Drive
amperage needs checking.
What an Asphalt Plant Operator Can Do for Maintenance?
If you have a conveyor belt on your premises, you must only let an authorized operator run it. Below are some of the dons and don’ts of the Asphalt Plant operating a conveyor belt.
- A conveyor belt is inoperable when its motor guards are set in position.
- If a component is stuck inside, the conveyor should be stopped first before retrieval is attempted.
- Personnel
in anything but work, apparel should not be allowed near the belt.
- Conveyor
belts must be maintained regularly to keep them going smoothly.
- All
spillages near the conveyor need to be promptly cleaned.
- Anything
sharp stuck in the conveyor belt should be removed without delay.
- All
repair works must be promptly done to ensure that the issue does not escalate.
- Loading
and transfer points should be checked for spillage from time to time.
- All
materials should be loaded only at the center of the belt.
- For
maximum output and longevity of a conveyor belt, the machine and its
moving parts should be taken well care of.
Things to Check When Inspecting a Conveyor Belt:
Here is a list of things that need checking before a conveyor belt maintenance run.
- Alignment
of the belt
- Removal
of all foreign components
- Structure
maintenance
- Removal
of spillage
- Setting
up of the scrapper
- Repositioning
all things off-center
- Adjustment
of the skirt boards
Comments
Post a Comment